Manualshelf

User's Manual

ManualsBrandsPLANET Technology ManualsGigabit RouterIndustrial 5-Port 10/100/1000T Wall-mount Gigabit Router
51525354555657585960
User’s Manual of WGR-500
58
4.3.6 IPv6 WAN Setting
This page is used to configure parameter for IPv6 internet network which connects to WAN port of your industrial
wall-mount Gigabit router as shown in Figure 4-32. It allows you to enable IPv6 function and set up the parameters
of the router’s WAN. In this setting, you may change WAN original type and WAN link type.
Figure 4-32: IPv6 WAN setup
Object Description
Enable IPv6
Click this box to enable IPv6 configuration.
Original Type
Select either Auto or Static. In Auto you could choose the DHCP type for
Stateless Address Auto or Stateful Address Auto Configuration. In Static you
need to fill in the Static IP address table.
WAN Link Type
Select IPv6 WAN type either by using Ethernet or PPPoE.