Manualshelf

User's Manual

ManualsBrandsPLANET Technology ManualsGigabit RouterIndustrial 5-Port 10/100/1000T Wall-mount Gigabit Router
51525354555657585960
User’s Manual of WGR-500
54
4.3.4 Route
There are two route types -- Dynamic Route and Static Route. Please refer to the following sections for the
details as shown in Figure 4-29.
Figure 4-29: Routing setup
■ Dynamic routing
Dynamic routing is a networking technique that provides optimal data routing. Unlike static routing, dynamic
routing enables routers to select paths according to real-time logical network layout changes. RIPng exchanges
routing information used to compute routes and is intended for IP version 6 (IPv6)-based networks while RIPv1
and RIPv2 is intended for IP version 4 (IPv4)-based networks.
Object Description
Enable Dynamic Route
Click this box to enable Dynamic Route.
NAT
Enable or Disable NAT function
RIP Send
Disable:do not send any RIP packet out
RIP1: Send RIP1 packet out
RIP2. Send RIP2 packet out