User's Manual

User’s Manual of WGR-500
35
Object Description
Switch
In this mode, all Ethernet ports are bridged together and NAT function is
disabled. All the WAN-related functions and firewall are not supported.
Step 3: Time Zone Setting
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal
system clock. Daylight Saving can also be configured to automatically adjust the time when needed.
The setup is shown in Figure 4-9
Figure 4-9: Setup Wizard – Time Zone Configuration
Object Description
Enable NTP client update
Check this box to connect NTP server and synchronize internet time.
Automatically Adjust Daylight
Savings
Check this box to adjust the daylight savings automatically.
Time Zone Select
Select the Time Zone from the drop-down menu.
NTP Server
Select the NTP server from the drop-down menu.
Step 4: LAN Interface Setting
Set up the IP Address and Subnet Mask for the LAN interface as shown in Figure 4-10.