Manualshelf

User's Manual

ManualsBrandsPLANET Technology ManualsGigabit RouterIndustrial 5-Port 10/100/1000T Wall-mount Gigabit Router
31323334353637383940
User’s Manual of WGR-500
34
4.2.2 Setup Wizard
The Wizard will guide the user to configuring industrial wall-mount Gigabit router easily and quickly. There are
different procedures in different operation modes. According to the operation mode you switch to, please follow the
instructions below to configure industrial wall-mount Gigabit router via Setup Wizard as shown in Figure 4-7.
Figure 4-7: Setup Wizard
Step 1: Operation Mode
The router supports two operation modes, Router and Switch, as shown in Figure 4-8.
Figure 4-8: Setup Wizard – Operation Mode
Object Description
Router
In this mode, the device is supposed to connect to internet via
xDSL/Cable/xPON/Fiber modem. The NAT is enabled and PCs in LAN ports
share the same IP with ISP through WAN port. The connection type can be
set up in WAN page by using PPPOE, DHCP client, PPTP client , L2TP
client or static IP.