User's Manual

User’s Manual of WGR-500
10
1.3. Product Features
 Physical Port
 Four 10/100/1000BASE-T RJ45 ports
 One 10/100/1000BASE-T RJ45 WAN port or LAN port ( router mode / switch mode)
 Industrial Case and Installation
 Compact size with fixed wall mounting, magnetic wall mounting or DIN-rail design
 IP30 metal case
 Supports -10 to 60 degrees C operating temperature
 Supports ESD 6KV DC Ethernet protection
 Dual power input design
- 9V~48V DC wide power input, redundant power with reverse polarity protection
- 2-pin terminal block or DC jack connector
 Layer 2 Features
 Supports IEEE 802.1Q tagged VLAN
 Supports IEEE 802.1D Spanning Tree Protocol (STP)
 Layer 3 IP Routing Features
 IPv6 support
 WAN Internet types: Dynamic IP(DHCP Client), static IP, PPPoE, L2TP, PPTP
 Static and dynamic (RIP1 and 2) routing
 Supports Port Forwarding, DMZ, and UPnP for various networking applications
 IP/MAC-based bandwidth control
 Supports Dynamic DNS and PLANET DDNS
 Security
 Port filtering lets you either allow or prevent which applications can access the Internet.
 MAC filtering allows you to include or exclude computers and devices based on their MAC address
 URL filtering allows you to control access to Internet websites in an URL list
 IP source guard prevents IP spoofing attacks
 DoS attack prevention
 Management
 Management Interfaces
- Web GUI management
 Static and DHCP for IP address assignment
 System Maintenance
- Firmware upload/download via HTTP
- Hardware-based reset button for system reboot or reset to factory default
 NTP (Network Time Protocol)
 Event message logging to remote syslog server
 PLANET Smart Discovery Utility for deployment management