Datasheet

WGR-500
5
Specications
Product
WGR-500
Hardware Specications
Interface
LAN 4 x 10/100/1000 BASE-T, auto-negotiation, auto MDI/MDI-X RJ45 port
WAN 1 x 10/100/1000 BASE-T, auto-negotiation, auto MDI/MDI-X RJ45 port
DIP Switch For router and switch mode
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
ESD Protection 6KV DC
Enclosure IP30 metal case
Installation DIN-rail or wall mounting
Connector
Removable 2-pin terminal block for power input
- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
DC power jack with 2.1mm central pole
LED Indicator
System:
Internet (Green)
PWR (Green)
SYS (Green)
Per 10/100/1000T RJ45 Ports:
10/100 LNK/ACT (Green)
1000 LNK/ACT (Amber)
Dimensions (W x D x H) 148 x 24.2 x 134 mm
Weight 487 g
Power Requirements Dual 9~48V DC
Power Consumption
Max. 1.71 watts/5.84 BTU (Power on without any connection)
Max. 4.32 watts/14.75 BTU (Full loading)
Router Features
Internet Connection Type
Shares data and Internet access for users, supporting the following internet accesses:
■ PPPoE
■ Static IP
■ Dynamic IP
Routing Protocol
■ Static routing
■ RIPv1/2
Security
DOS protection
MAC/IP/Port/URL ltering
Protocol / Feature
802.1Q tag-based VLAN
802.1d spanning tree
QoS
NAT and HW NAT
Port Forwarding
DMZ
UPnP and PLANET DDNS
System Management
Web-based (HTTP) conguration
SNTP time synchronization
System log supports remote log
SNMP v1, v2c monitoring
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Standards Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3ab Gigabit 1000T
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
Standards Compliance
Operating Temperature -10 ~ 60 degrees C
Storage Temperature -20 ~ 70 degrees C
Humidity 5 ~ 95% (non-condensing)