Datasheet

ManualsBrandsPLANET Technology ManualsGigabit RouterIndustrial 5-Port 10/100/1000T Wall-mount Gigabit Router

WGR-500

Industrial 5-Port 10/100/1000T Wall-mount Gigabit Router

Compact and Cost-effective for Building Industrial IoT Networks

PLANET WGR-500 is an industrial router designed for such Internet of Things

(IoT) networks as industry, transportation, government, agriculture and other public

areas. Its compact size and redundant power design are perfect for any network

environment and stable operation.

The WGR-500, the best solution for any industry router application, features the

following special management and operation functions:

■ Setup Wizard design and IPv6/IPv4 support

■ Router and switch working mode

■ Firewall with 802.1Q VLAN security

■ HW NAT accelerates internet NAT routing performance

■ 9-48V DC redundant power design

Physical Port

• Four 10/100/1000BASE-T RJ45 ports

• One 10/100/1000BASE-T RJ45 WAN port or LAN port (

router mode/switch mode)

Industrial Case and Installation

• Compact size with xed wall mounting, magnetic wall

mounting or DIN-rail design

• IP30 metal case

• Supports -10 to 60 degrees C operating temperature

• Supports ESD 6KV DC Ethernet protection

• Dual power input design

– 9V~48V DC wide power input, redundant power with

reverse polarity protection

– 2-pin terminal block or DC jack connector

Layer 2 Features

• Supports IEEE 802.1Q tagged VLAN

• Supports IEEE 802.1D Spanning Tree Protocol (STP)

Layer 3 IP Routing Features

• IPv6 support

• WAN Internet types: Dynamic IP(DHCP Client), static IP,

PPPoE, L2TP, PPTP

• Static and dynamic (RIP1 and 2) routing

• Supports Port Forwarding, DMZ, UPnP and for various

networking applications

• IP/MAC-based bandwidth control

• Supports Dynamic DNS and PLANET DDNS

Security

• Port ltering lets you either allow or prevent which

applications can access the Internet.

• MAC ltering allows you to include or exclude computers

and devices based on their MAC address

• URL ltering allows you to control access to Internet

websites in an URL list

• IP source guard prevents IP spoong attacks

• DoS attack prevention

WAN

WGR-500

Managed Magnet Mounting

DC Input Range

9-48V

, 0.6A max.

V+

PWR

Reset

Mode

Router Switch

SYS

Internet

LNK/ACT1000

ACTLNK

1000

WAN

WGR-500

Managed Magnet Mounting

DC Input Range

9-48V

, 0.6A max.

V+

PWR

LNK/ACT1000

WAN

WGR-500

Managed Magnet Mounting

Reset

Mode

Router Switch

SYS

Internet

ACTLNK

1000

DIP Switch for router/switch

Dual Redundant Power design

Summary of content (6 pages)

PAGE 1
WGR-500 Industrial 5-Port 10/100/1000T Wall-mount Gigabit Router Physical Port • Four 10/100/1000BASE-T RJ45 ports • One 10/100/1000BASE-T RJ45 WAN port or LAN port ( router mode/switch mode) Industrial Case and Installation • Compact size with fixed wall mounting, magnetic wall mounting or DIN-rail design • IP30 metal case Compact and Cost-effective for Building Industrial IoT Networks • Supports -10 to 60 degrees C operating temperature PLANET WGR-500 is an industrial router designed for such Interne
PAGE 2
WGR-500 IPv6 Support for IoT Networking Management With billions of new IoT devices entering the market each year, IPv4 is faced with • Management Interfaces the issue of not being able to fulfill the requirements of connecting all the IoT –– Web GUI management products together. IPv6 offers a highly-scalable address scheme that provides • Static and DHCP for IP address assignment a unique 64-bit host ID to every present and future IoT device.
PAGE 3
WGR-500 VLAN Support for Isolated Traffic and Security Virtual LANs (VLANs) offer the logical grouping technique to separate the physical ports of Ethernet switch. It can separate private network into several parts for different users. If there are too many computers or networking devices in the same network segment, it will result in heavy traffics locally. Besides, VLANs provide enhanced network security that network administrators can control over each port and whatever resources it is allowed to use.
PAGE 4
WGR-500 Dual Power Input for High Availability Network System The WGS-500 features a strong dual power input system (9V~48V DC) incorporated into customer’s automation network to enhance system reliability and uptime. In the example below, when the 2-pin terminal block fails to work, the hardware failover function will be activated automatically to keep powering the WGS-500 via the DC plug power alternatively without any loss of operation.
PAGE 5
WGR-500 Specifications WGR-500 Product Hardware Specifications Interface LAN 4 x 10/100/1000 BASE-T, auto-negotiation, auto MDI/MDI-X RJ45 port WAN 1 x 10/100/1000 BASE-T, auto-negotiation, auto MDI/MDI-X RJ45 port DIP Switch For router and switch mode Reset Button < 5 sec: System reboot > 5 sec: Factory default ESD Protection 6KV DC Enclosure IP30 metal case Installation DIN-rail or wall mounting Connector Removable 2-pin terminal block for power input - Pin 1/2 for Power (Pin 1: V+ / Pin
PAGE 6
WGR-500 Drawing Top View Fault PWR2 V2+ 1 DC Input: 12-56V , 6A max. ON OFF Enable Disable 2 Legacy BT Mounting Kit Front View 28.00 18.00 Side View 2 ON DIP 1 LFPP PoE 87.80 30.00 Max. fault loading: 24V, 1A V1+ PWR1 DIP Rear View Side View 15.20 P2 40.00 28.00 9.20 P1 Fault 30W 60W 90W+ 46.50 53.50 100/1000X LNK/ ACT 48.80 48.80 135.00 DIN-Rail Kit 53.50 LNK ACT PoE-in-Use 10/100/1000T 28.00 39.70 802.3bt PoE++ IGUP-805AT 18.00 87.80 32.00 97.