WGR-500-Series User Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Router Management
- Chapter 4. Configuration in Web UI
- Appendix A: Troubleshooting
- Appendix B: Planet Smart Discovery Utility
- Appendix C: Planet DDNS
- Appendix D: Glossary
User’s Manual of WGR-500-4P and WGR-500-4PV
64
Object
Description
AdvLinkMTU
Enter value of Advertises the given link MTU in the RA if specified. 0 value
disables MTU advertisements.
AdvReachable Time
Enter value of Advertises assumed reach-ability time in milliseconds of
neighbors in the RA if specified. 0 value disables reach-ability
advertisements.
AdvRetransTime
Enter value of Advertises wait time in milliseconds between Neighbor
Solicitation messages in the RA if specified. 0 value is disables re-transmit
advertisements
AdvCurHopLimit
Enter value of Advertises the default Hop Count value for outgoing unicast
packets in the RA. 0 value is disables hopcount advertisements. By default
value is set to 64.
AdvDefaultLifetime
Enter value of Advertises the lifetime of the default router in seconds. 0
value is indicates that the node is no default router. By default it is set to
1800.
AdvDefaultPreference
Select the advertises default router preference. By default it is set to
medium.
AdvSourceLLAddress To include the link-layer address of the outgoing interface in the RA.
UnicastOnly
To enable the indication that the underlying link is not broadcast capable,
prevents unsolicited advertisements from being sent.