WGR-500-Series User Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Router Management
- Chapter 4. Configuration in Web UI
- Appendix A: Troubleshooting
- Appendix B: Planet Smart Discovery Utility
- Appendix C: Planet DDNS
- Appendix D: Glossary
User’s Manual of WGR-500-4P and WGR-500-4PV
28
3.3 LCD Touch Screen
The WGR-500-4PV has a 2.4-inch color LCD touch screen with management functions. Tap the LCD touch screen
to wake the LCD touch screen as hown in Figure 3-4.
Figure 3-4: To wake the LCD touch screen
The factory default LCD configurations are shown as follows.
Default LCD: Enable
Default Touch Screen: Enable
Default Backlight Timeout: Enable
Default Backlight Timeout Time: 300
Default Read Only Mode: Disable
Default Screen: Main Menu
Default Time Interval: 10
Default Color Scheme: Dark
Default Pin Number: 1234
You can use the Web management interface and click LCD, and then in the LCD Management, change LCD
configuration hown in Figure 3-5.
Figure 3-5: LCD Status