User's Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Router Management
- Chapter 4. Configuration in Web UI
- Appendix A: Troubleshooting
- Appendix B: Planet Smart Discovery Utility
- Appendix C: Planet DDNS
- Appendix D: Glossary
User’s Manual of WGR-500-4P and WGR-500-4PV
65
Figure 4-35: IPv6 RADVD Prefix
Object
Description
Enable RADVD prefix Click this box to enable RADVD prefix.
Prefix Assigned the advertised IPv6 route prefix.
AdvOnLinkFlag To enable indication that this prefix can be used for on-link determination.
AdvAutonomousFlag
To enable indication that this prefix can be used for autonomous address
configuration.
AdvValidLifetime
Enter the advertising length of time in seconds that the prefix is valid for
purpose of on-link determination.
AdvPreferredLifeTime
Enter the advertising length of time in seconds that addresses generated
from the prefix via stateless address autoconfiguration remain preferred.
The special value infinity means forever
AdvRouterAddr
Enable indication of the address of interface that is sent instead of network
prefix.
if6to4 Specifies a logical interface name to derive a 6to4 prefix origin.