User's Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Router Management
- Chapter 4. Configuration in Web UI
- Appendix A: Troubleshooting
- Appendix B: Planet Smart Discovery Utility
- Appendix C: Planet DDNS
- Appendix D: Glossary
User’s Manual of WGR-500-4P and WGR-500-4PV
56
4.3.3 VLAN
VLAN (Virtual Local Area Network) allows a physical network to be partitioned into multiple logical networks.
Devices on a logical network belong to one group. A device can belong to more than one group. With VLAN, a
device cannot directly talk to or hear from devices that are not in the same group. Please refer to the following
sections for the details as shown in Figure 4-28.
Figure 4-28: VLAN Setup
Object
Description
Enable 802.1Q VLAN Check this box to enable 802.1Q VLAN function.
VLAN ID Set VLAN ID (1-4095)
Forwarding Rule Select Bridge or NAT mode
Hardware NAT Check this box to enable Hardware NAT function.
Member Add VLAN without tag to packet
Tagged Add VLAN tag to packet
Change PVID setting Check this box to enable change PVID (default vlan id)