User's Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Router Management
- Chapter 4. Configuration in Web UI
- Appendix A: Troubleshooting
- Appendix B: Planet Smart Discovery Utility
- Appendix C: Planet DDNS
- Appendix D: Glossary
User’s Manual of WGR-500-4P and WGR-500-4PV
50
Save
Press this button to save changes.
Save & Apply
Press this button to save and apply changes.
Reset
Press this button to undo any changes made locally and revert to previously
saved values.
4.2.10 Log
This section will help you to configure the settings of system log as shown in Figure 4-24. You can check the box
of the items you want to record it in the log.
Figure 4-24: Log
Object Description
Enable Log Check to enable log function.
System all/DoS Select which log you want to check. Related information will be shown
below.
Enable Remote Log Check to enable remote log functionality.
Log Server IP Address Enter Log Server IP Address for remote log.
Apply Changes
Press this button to save and apply changes.
Refresh
Press this button to refresh the current Web page.
Clear
Press this button to clear log information.