User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. FAQs
- FAQ 1. What can I do if I forgot my wireless password?
- FAQ 2. What can I do if I forgot my login password of the web management page?
- FAQ 3. I cannot log into the router’s web management page, what can I do?
- FAQ 4. I cannot access the Internet even though the configuration is finished. What can I do?
- FAQ 5. I cannot find my wireless network or I cannot connect the wireless network
- FAQ 6. How to switch the working mode of the router?
- FAQ 7. How to troubleshoot wireless relay failure
- FAQ 8. How to place routers for best signal/coverage
- FAQ 9. How to troubleshoot W-Fi Mesh networking failure
- Chapter 7. Quick Connection to a Wireless Network
- Appendix A: Specifications
User Manual of WDRT-1800AX
-68-
Fault 2: Relay failed
1) Set according to Fault 1.
2) The main route and the sub-route are too far apart.
3) Confirm that the SSID and password for connecting to the main router are correct
4) Check whether the upper-level router has set MAC filtering. If so, please add it.
5) Factory reset or update the latest firmware
FAQ 8. How to place routers for best signal/coverage
Wi-Fi signal strength and range depend on factors such as frequency band, radio power output, receiver
sensitivity, antenna gain, and antenna type. The environment also plays a very important role in the coverage
and performance of the router. Floors, walls, obstacles and radio signal interference can weaken the Wi-Fi
signal.
So, in many cases, the easiest and low-cost way to improve Wi-Fi coverage is to move the router to a better
location. Here, we will provide some options for your reference.
1) Put the router in the middle