User's Manual

User Manual of WDRT-1800AX
-63-
3. Firewalls and viruses
Sometimes firewalls and antivirus software on your computer can block access to the router and you need to
turn them off or replace a device.
FAQ 4. I cannot access the Internet even though the configuration is
finished. What can I do?
1.Check the physical connection of the WAN interface
If the Un insert cable message appears on the router's Internet setup page, it means that the network cable is
not inserted correctly. Please insert and make sure the red message disappears
2.Restart the router or modem
3.Clone your PC's MAC address
Some operators will bind your computer's MAC address when you access the Internet through the cable modem
for the first time, then we need to clone your computer's MAC address to the router
1. Visit http://192.168.1.1
2. Go to Internet setupAdvancedMAC clone
3. Select Local host MAC, which clones your PC's MAC address to the router's WAN MAC address