User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. FAQs
- FAQ 1. What can I do if I forgot my wireless password?
- FAQ 2. What can I do if I forgot my login password of the web management page?
- FAQ 3. I cannot log into the router’s web management page, what can I do?
- FAQ 4. I cannot access the Internet even though the configuration is finished. What can I do?
- FAQ 5. I cannot find my wireless network or I cannot connect the wireless network
- FAQ 6. How to switch the working mode of the router?
- FAQ 7. How to troubleshoot wireless relay failure
- FAQ 8. How to place routers for best signal/coverage
- FAQ 9. How to troubleshoot W-Fi Mesh networking failure
- Chapter 7. Quick Connection to a Wireless Network
- Appendix A: Specifications
User Manual of WDRT-1800AX
-52-
5.1.21 Static IP allocation (IP & MAC Binding)
IP and MAC Binding is used to bind the IP address of a network device to its MAC address. This will prevent
ARP spoofing and other ARP attacks by denying network access to devices in the binding list with matching IP
addresses but unrecognized MAC addresses.
Steps to follow:
1) Go to Router
Static IP allocation
2) Bind your device according to your need
Note: The bound IP cannot be the IP in use
Figure 5-35 IP & MAC Binding
Object
Description
Device Name Enter a name for the device
MAC Address Enter a MAC address
IP
Enter the specified IP address in the IP pool range, which is
assigned to the host.
Operation Press the “+” or “-” button to add or delete the rule.