User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. FAQs
- FAQ 1. What can I do if I forgot my wireless password?
- FAQ 2. What can I do if I forgot my login password of the web management page?
- FAQ 3. I cannot log into the router’s web management page, what can I do?
- FAQ 4. I cannot access the Internet even though the configuration is finished. What can I do?
- FAQ 5. I cannot find my wireless network or I cannot connect the wireless network
- FAQ 6. How to switch the working mode of the router?
- FAQ 7. How to troubleshoot wireless relay failure
- FAQ 8. How to place routers for best signal/coverage
- FAQ 9. How to troubleshoot W-Fi Mesh networking failure
- Chapter 7. Quick Connection to a Wireless Network
- Appendix A: Specifications
User Manual of WDRT-1800AX
-43-
Advanced
5.1.11 Internet control (Flow Control)
This page can specify upload and download speeds for some devices.
Steps to follow:
1) Go to AdvancedInternet controlTurn on “Hardware speedup”
2) Find your device in the list and turn “ON” speed
3) Enter the speed you need in Download(KB) / Upload(KB)
4) Click Confirm
Figure 5-25 Add rule of Internet control (Speed Limit)
Object Description
Hardware speedup
Enable or disable hardware speedup, bandwidth control invalid.
Terminal name
Shows device name, IP address, and MAC address.
Download speed
Shows device download speed.
Upload speed
Shows device upload speed.
Download(KB)
Enter the downstream limited for kbps