User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. FAQs
- FAQ 1. What can I do if I forgot my wireless password?
- FAQ 2. What can I do if I forgot my login password of the web management page?
- FAQ 3. I cannot log into the router’s web management page, what can I do?
- FAQ 4. I cannot access the Internet even though the configuration is finished. What can I do?
- FAQ 5. I cannot find my wireless network or I cannot connect the wireless network
- FAQ 6. How to switch the working mode of the router?
- FAQ 7. How to troubleshoot wireless relay failure
- FAQ 8. How to place routers for best signal/coverage
- FAQ 9. How to troubleshoot W-Fi Mesh networking failure
- Chapter 7. Quick Connection to a Wireless Network
- Appendix A: Specifications
User Manual of WDRT-1800AX
-42-
Figure 5-23 IPv6 WANSetting- PPPoEv6
Object Description
Mode
Select IPv6 WANsetting mode; default is Automatic mode.
Account
Enter the account provided by your ISP.
Password
Enter the password provided by your ISP.
Address distribution
Enable it and WAN IPv6 will get a prefix address from IPv6
server.
5.1.10 IPv6 LAN Setting
Configure LAN ports, let IPv6 LAN-address and IPv6 LAN prefix in Automatic mode. You can enable or disable
DHCPv6 function .
Figure 5-24 IPv6 LANSetting
Object Description
IPv6 LAN-address
LAN IPv6 address will automatically assigned by ISP.
IPv6 LAN Prefix
LAN Prefix will automatically get by ISP.
DHCPv6
Enable or disable DHCPv6 function.