User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. FAQs
- FAQ 1. What can I do if I forgot my wireless password?
- FAQ 2. What can I do if I forgot my login password of the web management page?
- FAQ 3. I cannot log into the router’s web management page, what can I do?
- FAQ 4. I cannot access the Internet even though the configuration is finished. What can I do?
- FAQ 5. I cannot find my wireless network or I cannot connect the wireless network
- FAQ 6. How to switch the working mode of the router?
- FAQ 7. How to troubleshoot wireless relay failure
- FAQ 8. How to place routers for best signal/coverage
- FAQ 9. How to troubleshoot W-Fi Mesh networking failure
- Chapter 7. Quick Connection to a Wireless Network
- Appendix A: Specifications
User Manual of WDRT-1800AX
-41-
4) Or click the "Add" button to define the device's MAC address that needs to be controlled.
Figure 5-21 Add devices manually
IPv6
5.1.9 IPv6 WANSetting
There are two options in IPv6 WANsetting mode, Automatic and PPPoEv6; default is Automatic mode. Please
check “Get ipv6 prefix agent”, meaning WAN IPv6 will get a prefix address from IPv6 server.
Automatic
Figure 5-22 IPv6 WANSetting- Automatic
Object Description
Mode
Select IPv6 WANsetting mode; default is Automatic mode.
Address distribution
Enable it and WAN IPv6 will get a prefix address from IPv6
server.
PPPoEv6
If you get information of IPv6 connection from ISP, you can choose PPPoEv6 mode, and fill in blank with
information of account and password.