User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. FAQs
- FAQ 1. What can I do if I forgot my wireless password?
- FAQ 2. What can I do if I forgot my login password of the web management page?
- FAQ 3. I cannot log into the router’s web management page, what can I do?
- FAQ 4. I cannot access the Internet even though the configuration is finished. What can I do?
- FAQ 5. I cannot find my wireless network or I cannot connect the wireless network
- FAQ 6. How to switch the working mode of the router?
- FAQ 7. How to troubleshoot wireless relay failure
- FAQ 8. How to place routers for best signal/coverage
- FAQ 9. How to troubleshoot W-Fi Mesh networking failure
- Chapter 7. Quick Connection to a Wireless Network
- Appendix A: Specifications
User Manual of WDRT-1800AX
-33-
Figure 5-11 Advanced PPPoE
Object Description
Account Enter the account provided by your ISP.
Password Enter the password provided by your ISP.
DNS1
Enter the necessary DNS address provided by your ISP.
Default is 8.8.8.8
DNS2
Enter the secondary DNS address provided by your ISP
MTU Maximum Transmission Unit. Default is 1500
MAC clone
Enable to clone the MAC address
Wireless
Input router web main interface, click Wireless2G WIFI name and password or 5G WIFI name and
password, and then we can view WIFI mode, Channel and Bandwidth, etc.
5.1.4 2.4G WIFI name and password
Click Wireless2G WIFI name and password, and then config wireless as shown in the following parameter: