User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. FAQs
- FAQ 1. What can I do if I forgot my wireless password?
- FAQ 2. What can I do if I forgot my login password of the web management page?
- FAQ 3. I cannot log into the router’s web management page, what can I do?
- FAQ 4. I cannot access the Internet even though the configuration is finished. What can I do?
- FAQ 5. I cannot find my wireless network or I cannot connect the wireless network
- FAQ 6. How to switch the working mode of the router?
- FAQ 7. How to troubleshoot wireless relay failure
- FAQ 8. How to place routers for best signal/coverage
- FAQ 9. How to troubleshoot W-Fi Mesh networking failure
- Chapter 7. Quick Connection to a Wireless Network
- Appendix A: Specifications
User Manual of WDRT-1800AX
-30-
Click Enable to check your Internet connection, and click Router status on the right of the page. After the
connection succeeds, the screen will display as follows. Here we take Dynamic IP as an example.
Figure 5-8 PPPoE
Internet setup
5.1.3 Advanced
Please follow the instructions on the 5.2.2 Mode to continue the configuration. Press the
button for advanced settings.
1) If Dynamic IP is chosen, you need to select whether to clone the MAC address. Dynamic IP users are usually
equipped with a cable TV or fiber cable.