User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. FAQs
- FAQ 1. What can I do if I forgot my wireless password?
- FAQ 2. What can I do if I forgot my login password of the web management page?
- FAQ 3. I cannot log into the router’s web management page, what can I do?
- FAQ 4. I cannot access the Internet even though the configuration is finished. What can I do?
- FAQ 5. I cannot find my wireless network or I cannot connect the wireless network
- FAQ 6. How to switch the working mode of the router?
- FAQ 7. How to troubleshoot wireless relay failure
- FAQ 8. How to place routers for best signal/coverage
- FAQ 9. How to troubleshoot W-Fi Mesh networking failure
- Chapter 7. Quick Connection to a Wireless Network
- Appendix A: Specifications
User Manual of WDRT-1800AX
-13-
2.1.3 Rear Panel
The rear panel provides the physical connectors connected to the power adapter and any other network device.
Figure 2-4 shows the rear panel of the WDRT-1800AX.
Rear Panel
Figure 2-4 Rear Panel of the WDRT-1800AX
Interface
Description
WPS/Reset
Press for 1 second to enable or disable WLAN function; press over 5
seconds to enable WPS function
Press over 5 seconds and then the system restores to the factory
default settings
LAN1-4 Connect to the user’s PC or network devices
WAN Connect to the Cable/xDSL Modem or the Ethernet
Power Connect to the power adapter provided in the package
Table 2-2 Interface Indications