User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Chapter 6. FAQs
- FAQ 1. What can I do if I forgot my wireless password?
- FAQ 2. What can I do if I forgot my login password of the web management page?
- FAQ 3. I cannot log into the router’s web management page, what can I do?
- FAQ 4. I cannot access the Internet even though the configuration is finished. What can I do?
- FAQ 5. I cannot find my wireless network or I cannot connect the wireless network
- FAQ 6. How to switch the working mode of the router?
- FAQ 7. How to troubleshoot wireless relay failure
- FAQ 8. How to place routers for best signal/coverage
- FAQ 9. How to troubleshoot W-Fi Mesh networking failure
- Chapter 7. Quick Connection to a Wireless Network
- Appendix A: Specifications
User Manual of WDRT-1800AX
-4-
BSS (Basic Service Set) Coloring
The BSS color is a numerical identifier of the BSS. 802.11ax radios are able to differentiate between BSSs
using BSS color identifier when other radios transmit on the same channel. If the color is the same, this is
considered to be an intra-BSS frame transmission. In other words, the transmitting radio belongs to the same
BSS as the receiver. If the detected frame has a different BSS color from its own, then the STA considers that
frame as an inter-BSS frame from an overlapping BSS.