Quick Guide

– 5 – – 6 –
– 7 – – 8 –
Step 3: Click the “Enter the management page” button to continue.
Step 4: You can see the Web management UI of the WDRT-1800AX
afterconguringthisdevice.
4.NetworkConguration(Windows10)
Set your computer to get an IP address from the
Wireless Router:
1. Click the “Start” button located at the lower-left corner of your
computer.
2. Click “Settings”.
3. Double-click the “Network & Internet” icon.
4. Click “Change Adapter Options”.
5. Double-click “Local Area Connection”.
6. Select “Internet Protocol Version 4 (TCP/IPv4)” and click “Prop-
erties”.
7. Select “Obtain an IP Address automatically” and “Obtain DNS
Server Address automatically”, and then click the “OK” button
twicetosavetheconguration.
Further Information:
The above steps introduce the simple installations and congurations of
the WDRT-1800AX. For further congurations of LAN, Wireless, Access
Control, etc, please refer to the user manual, which can be downloaded
from the website.
https://www.planet.com.tw/en/support/download.
php?&method=keyword&keyword=WDRT-1800AX&view=3#list
Ifyouhavefurtherquestions,pleasecontactthelocaldealerordistributor
where you purchased this product.
5.EnterintotheWebManagement
DefaultIPAddress:192.168.1.1
Default Password: admin
DefaultSSID:PLANET_2.4G
PLANET_5G
Step 1: The Web management allows you to access and manage the
Wireless Router easily. Launch the Web browser and enter the
defaultIPaddresshttp://192.168.1.1.
Step 2: When the login window pops up, please enter the Password. The
default Password is “admin”. Then click the “Login” button to
continue.
Energy Saving Note of the Device
This power required device does not support Standby mode operation. For energy savings, please remove the DC plug or slide
the hardware-based Power Switch to the OFF position to disconnect the device from the power circuit. Without removing the DC
plug from or switching off the device, the device will still consume power from the power source. In view of Saving the Energy
and reducing the unnecessary power consumption, it is strongly suggested to power off or to remove the DC plug from the
device if this device is not intended to be active.
PLANET Technology Corp.
2011-E50360-000 10F., No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan