Datasheet

WDAP-W1200E
7
Software Features
LAN
Static IP/DHCP Client
Supports IP-MAC binding
WAN
■ Static IP
■ Dynamic IP
■ PPPoE
Wireless Mode
■ Access Point
■ Gateway
■ WISP
■ Repeater
■ Super WDS
Channel Width 20MHz, 40MHz, 80MHz
Encryption Security 64-/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Wireless Security
Enable/Disable SSID Broadcast
Wireless–lteringofmax.32MACaddresses
User Isolation
Max. SSIDs 8 ( 4 per radio)
Max. Clients 128 (100 is suggested, depending on usage)
Max. WDS Peers 4
Wireless QoS Supports Wi-Fi Multimedia (WMM)
Wireless Advanced
Auto channel selection
5-level transmit power control (100%, 75%, 50%, 25%, 12.5%)
Client limit control, coverage threshold
Wi-Fi channel analysis chart
Fast Roaming
Status Monitoring
Device status, wireless client list
PLANET Smart Discovery
DHCP client table
System Log supports remote syslog server
VLAN
IEEE 802.1Q VLAN (VID: 3~4094)
SSID-to-VLAN mapping to up to 4 SSIDs
Self-healing Supports auto reboot settings per day/hour
Management
Remote management through PLANET DDNS/Easy DDNS
Congurationbackupandrestoration
Supports UPnP
Supports IGMP Proxy
Supports PPTP/L2TP/IPSec VPN Pass-through
SNMP v1/v2c/v3 support, MIB I/II, Private MIB
Central Management* Applicable controllers: NMS-500/NMS-1000V, WS-1232P, WS-2864PVR
*Remarks:Thefeaturewillbesupportedthroughrmware/systemupgrade.
Environment&Certication
Temperature
Operating: -20 ~ 55 degrees C
Storage: -40 ~ 70 degrees C
Humidity
Operating: 10 ~ 90% (non-condensing)
Storage: 5 ~ 95% (non-condensing)
Regulatory CE, RoHS
Ordering Information
WDAP-W1200E
Dual Band 802.11ac 1200Mbps Wave 2 In-wall Wireless Access Point
(EU Type, 802.3at PoE, 3 x 10/100/1000T LAN Ports, 1 x RJ11 Port )