User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Connecting to the AP
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the AP
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
User Manual of WDAP-C7210E_WDAP-W1200E_WDAP-850AC
-92-
Mac OS X 10.x
5.3
In the following sections, the default SSID of the WDAP series is configured to “default”.
Step 1: Right-click on the network icon displayed in the system tray
The AirPort Network Connection menu will appear.
Figure 6-10 Mac OS – Network Icon
Step 2: Highlight and select the wireless network (SSID) to connect
(1) Select and SSID [default].
(2) Double-click on the selected SSID.
Figure 6-11 Highlighting and Selecting the Wireless Network