User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Connecting to the AP
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the AP
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
User Manual of WDAP-C7210E_WDAP-W1200E_WDAP-850AC
-90-
Step 4: Enter the encryption key of the wireless AP
(1) The Connect to a Network box will appear.
(2) Enter the encryption key that is configured in section 5.7.2.1
(3) Click the [OK] button.
Figure 6-7 Typing the Network Key
Figure 6-8 Connecting to a Network