User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Connecting to the AP
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the AP
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
User Manual of WDAP-C7210E_WDAP-W1200E_WDAP-850AC
-96-
Step 3: Check Wi-Fi setting and select the available wireless network
(1) Choose the AirPort on the left menu (make sure it is ON)
(2) Select Network Name [default] here
If this is the first time to connect to the Wireless AP, it should show “No network selected”.
Figure 6-16 Selecting the Wireless Network