User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
User Manual of WDAP-C7200E
-82-
Step 4: Enter the encryption key of the wireless AP
(1) Enter the encryption key that is configured in section 5.7.2.1
(2) Click the [OK] button.
Figure 6-12 Enter the Password
If you will be connecting to this Wireless AP in the future, check [
Remember this
network].