User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
User Manual of WDAP-C7200E
-48-
The page includes the following fields:
Object Description
Wi-Fi Status Select ON (Green) or OFF (Gray) to enable or disable wireless LAN.
SSID
It is the wireless network name. The default SSID is “PLANET_2.4G”
or “PLANET_5G”.
Hide your SSID
？
Select ON (Green) or OFF (Gray) to hide wireless LAN or not.
Channel
It shows the channel of the CPE. Default 2.4GHz is channel 6.and
5GHz is channel 36.
Encryption Select the wireless encryption. The default is “None”.
WMM
Enable/Disable WMM ( Wi-Fi Multimedia ) function.
Wi-Fi Analyzer
Press this button to analyze local area wireless signal.
5.7.1.2. VAP
Figure 5-30 VAP
Select VAP1~VAP3 to enable virtual AP.
The page includes the following fields:
Object Description
Wi-Fi Status
Select ON (Green) or OFF (Gray) to enable or disable virtual wireless
LAN.
SSID
It is the wireless network name. The default 2.4G SSID is
“PLANET_2.4G_1” to “ PLANET_2.4G_3” and 5G SSID is
“PLANET_5G_1” to “PLANET_5G_3”.
Hide your SSID Select ON (Green) or OFF (Gray) to hide wireless LAN or not.
Channel
It shows the channel of the CPE. Default 2.4GHz is channel 6.and
5GHz is channel 36.
Encryption Select the wireless encryption. The default is “None”.
WMM
Enable/Disable WMM (Wi-Fi Multimedia ) function.