User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Physical Descriptions
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: DDNS Application
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
- EC Declaration of Conformity
User Manual of WDAP-C1800AX &WDAP-1800AX &WDAP-W1800AXU
- 99 -
Object
Description
Reboot
Press the button to reboot system.
Reset
Press the button to restore all settings to factory default
settings.
I'd like to keep the network
profiles.
Check the box and then press the button to
keep the current network profiles and reset all other
configurations to factory defaults.
4.5.6 Auto Reboot
Figure 4-61: Auto Reboot
Object
Description
Auto Reboot
Disable or enable the Auto Reboot function.
Reboot Type
Set the function type.
Time
Select reboot time for clock
4.5.7 Diagnostics
The page allows you to issue ICMP PING packets to troubleshoot IP connectivity issues. After you
press “Ping”, ICMP packets are transmitted, and the sequence number and roundtrip time are
displayed upon reception of a reply. The Page refreshes automatically until responses to all packets are
received, or until a timeout occurs. The ICMP Ping is shown in Figure 4-62.