User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Physical Descriptions
- Chapter 3. Preparation
- Chapter 4. Web-based Management
- Chapter 5. Quick Connection to a Wireless Network
- Appendix A: DDNS Application
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
- EC Declaration of Conformity
User Manual of WDAP-C1800AX &WDAP-1800AX &WDAP-W1800AXU
- 89 -
Figure 4-48: Repeater
Object Description
Select Radio
Select “2.4GHz” or “5GHz” wireless LAN.
SSID (Wireless Name )
Enter the root AP’s SSID or press “Scan” to select.
Lock BSSID Enable/disable to lock the root AP’s MAC address.
BSSID The root AP’s MAC address
Encryption
Select the wireless encryption of root AP. The default is “Open”
4.4.2 2.4G Wi-Fi
This page allows the user to define 2.4G Wi-Fi.
Figure 4-49: 2.4G Wi-Fi
Object Description
Wireless Status Allows user to enable or disable 2.4G Wi-Fi
Wireless Name (SSID) It is the wireless network name. The default 2.4G SSID is