User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the CPE
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the CPE
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
User Manual of WBS-512AC
-43-
Figure 5-12 Static IP
The page includes the following fields:
Object Description
IP Address
Enter the WAN IP address provided by your ISP. Enquire your ISP if you
are not clear
Subnet
Enter WAN Subnet Mask provided by your ISP
Default Gateway
Enter the WAN Gateway address provided by your ISP
MTU
Maximum Transmission Unit. Default is 1500
Primary DNS
Enter the necessary DNS address provided by your ISP
Secondary DNS
Enter the secondary DNS address provided by your ISP
Upstream
Enter limited upstream throughput, default is 1000000 Kbps
Downstream
Enter limited downstream throughput, default is 1000000 Kbps
PPPoE (ADSL)
Select PPPOE if your ISP is using a PPPoE connection and provide you with PPPoE user name and password
info.