User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the CPE
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the CPE
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
User Manual of WBS-512AC
-42-
The page includes the following fields:
Object Description
Read Community Enter the read community, default is public
Write Community Enter the write community, default is private
Trap Destination Address Enter the SNMP trap IP address, default is 192.168.1.100
5.7.5.3. VLAN Settings
Figure 5-11 VLAN Settings
The page includes the following fields:
Object Description
AP
Select AP or VAP included in the VLAN
VLAN ID
Enter the VLAN ID from 3 to 4094
5.7.5.4. WAN Settings
Static IP
If your ISP offers you static IP Internet connection type, select “Static IP" and then enter IP address, subnet mask,
default gateway and primary DNS information provided by your ISP in the corresponding fields.