User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the CPE
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the CPE
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
User Manual of WBS-512AC
-41-
5.7.5 Network
5.7.5.1. LAN Settings
Figure 5-25 LAN Settings
The page includes the following fields:
Object Description
IP Mode
Select “
Static IP
” or “
DHCP Client
” for setting up device IP
LAN IP
Enter the AP static IP address
Subnet
Enter the network mask
Gateway
Enter the default gateway IP address
Primary DNS
Enter the primary DNS IP address, or not
Secondary DNS
Enter the secondary DNS IP address, or not
5.7.5.2. SNMP Config
Figure 5-10 SNMP Config