User's Manual

User Manual of WBS-512AC
-39-
5.7.4 Advanced
5.7.4.1. Advanced
Figure 5-24 Advanced
The page includes the following fields:
Object Description
5G Mode
Select
802.11A
or
802.11AN
or
802.11AC
in CPE
Maximum 5G per AP The maximum users are 64
5G WLAN Partition
Enable it to isolate each connected wireless client so that they cannot
access mutually.
5G Coverage Threshold
The coverage threshold is to limit the weak signal of clients occupying
session. The default is -90dBm
5G TX Power The range of transmit power is Max (100%), Efficient (75%),
Enhanced (50%), Standard (25%) or Min (12.5%)
. In case of
shortening the distance and the coverage of the wireless network, input
a smaller value to reduce the radio transmission power
Multicast Fast
A part of the 802.11n standard that allows sending multiple frames per
single access to the medium by combining frames together into one
larger frame. It creates the larger frame by combining smaller frames
with the same physical source, destination end points, and traffic class
(QoS) into one large frame with a common MAC header
Short GI
Guard intervals are used to ensure that distinct transmissions do not
interfere with one another.
Packet Threshold
When the length of a data packet exceeds this value, the router will