User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the CPE
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the CPE
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
User Manual of WBS-512AC
-36-
5.7.1.2. VAP
Figure 5-21 VAP
Select VAP1~VAP3 to enable virtual AP
The page includes the following fields:
Object Description
Wi-Fi Status
Select ON (Green) or OFF (Gray) to enable or disable virtual wireless
LAN
SSID
It is the wireless network name. The default SSID is “PLANET_5G_1”
to “PLANET_5G_3”
Hide your SSID
？
Select ON (Green) or OFF (Gray) to hide wireless LAN or not
Channel
It shows the channel of the CPE. Default 5GHz is channel 36.
Encryption Select the wireless encryption. The default is “None”
WMM
Enable/Disable WMM (Wi-Fi Multimedia ) function