User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the CPE
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the CPE
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
User Manual of WBS-512AC
-34-
The page includes the following fields:
Object Description
Wi-Fi Status Select ON (Green) or OFF (Gray) to enable or disable wireless LAN
SSID
It is the wireless network name. The default SSID is “PLANET_5G”
Hide your SSID
？
Select ON (Green) or OFF (Gray) to hide wireless LAN or not
Encryption Select the wireless encryption. The default is “None”
Timing
Set time to restart
Figure 5-19 Repeater Mode – Setting up Wi-Fi
The page includes the following fields:
Object Description
IP Mode Select “Static IP” or “DHCP Client” for setting up device IP
LAN IP
Enter the AP static IP address
Subnet
Enter the network mask
Gateway
Enter the default gateway IP address
Primary DNS
Enter the primary DNS IP address, or not
Secondary DNS
Enter the secondary DNS IP address, or not
Enter the LAN IP address.