User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the CPE
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the CPE
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
User Manual of WBS-512AC
-32-
Repeater Mode
Click “Wizard” “Repeater Mode” and the following page will be displayed. This section allows you to
configure the Repeater mode.
Figure 5-16 Repeater Mode
The page includes the following fields:
Object
Description
Repeater SSID Enter the root AP’s SSID or press “Scan” to select
Lock BSSID
Check to lock the root AP’ MAC address
Encryption
Select the wireless encryption of root AP. The default is
“WPA/WPA2PSK_TKIPAES”
Password
Enter the password of root AP
Bandwidth Select the operating channel width, “20MHz” or “40MHz” or “80MHz”
P2P
Enable switch for Point to Point function