User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the CPE
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the CPE
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
User Manual of WBS-512AC
-13-
Step 2. Plug the RJ45 Ethernet cable into the PoE Port of the Outdoor Wireless CPE. Then, slide back the
cover to finish the installation.
Figure 3-2 Connect the Ethernet cable
Step 3. Place the mounting strap through the slot on the back of the Outdoor Wireless CPE and then around
the pole. Tighten the mounting strap to secure the Outdoor Wireless CPE.
Figure 3-3 Connect the PoE injector