User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting to the CPE
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the CPE
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: FAQs
- Appendix C: Troubleshooting
- Appendix D: Glossary
User Manual of WBS-512AC
-11-
2.1.1 Port and Button
It provides a simple interface monitoring the AP. Figure 2-4 shows the hardware-based interface of the WBS-
512AC.
WBS-512AC Hardware-based Interface:
Figure 2-4 WBS-512AC Interface
2.1.2 Hardware Description
Hardware Interface Definition
Object Description
PoE LAN Port
10/100/1000Mbps RJ45 port, auto MDI/MDI-X
LAN Port
10/100/1000Mbps RJ45 port, auto MDI/MDI-X
PtP Switch Position "Master" to "Slave" on the AP.
Reset/Pair Button
Press and hold the Reset button on the device for over 15 seconds to
return to the factory default setting.
Press the "Reset/Pair" button on both APs to be
connected in 2
minutes. The connection has been successfully established.
LAN
Reset/Pair
PtP Switch
WAN/PoE
DC Power