Datasheet

2
WBS-512AC
• SupportsIP/Port/MACaddress/URLltering,DoS,SPI
Firewall
• Supports DMZ and Port Forwarding
• Bandwidth control per IP address to increase network stabilit
Easy Installation and Management
• 3 simple steps to establish PtP ( AP + Repeater ) connection
easily
• Supports PLANET NMS Controllers in AP mode
• Easy discovery by PLANET Smart Discovery
• Self-healing mechanism through system auto reboot setting
• System status monitoring through remote Syslog Server
• Supports PLANET DDNS/Easy DDNS
WAVE 1
SU-MIMO
Serving one user at a time
WAVE 2
MU-MIMO
Serving multiple users simultaneously
Designed for Various Requirements
The WBS-512AC is specially designed for long-distance outdoor surveillance and wireless backhaul solutions that are capable of establishing stable bridge
connection through the embedded 14dBi unidirectional antenna. To provide maximum performance, the WBS-512AC can implement up to 6 operation modes
and is easy to use where a multitude of applications in communities, warehouses, campuses, harbors, etc. can be made.
AP Mode
Repeater Mode (PtP)
Gateway (Router) Mode
WISP (Router) Mode
Client
AP Mode
Repeater Mode
Gateway Mode
WISP Mode
xDSL Router
LAN
Internet
WBS-512AC
WBS-512AC
WBS-512AC
ClientsPoE Switch
Root AP
(Master)
(Slave)
Client
Internet
Client
Client
Client
LAN
Client
Wireless Internet
Service Provider
Internet
xDSL
Modem
WAN
WAN
LAN
LAN
Internet
WBS-512AC
PoE Switch
Repeater Mode (PtMP)
Repeater Mode
WBS-512AC
(Slave)
(Slave)
Clients
Clients
PoE Switch
Clients
Root AP
(Master)
PoE Switch
PoE Switch
Super WDS Mode
Super WDS Mode
WBS-512ACWBS-512AC
PoE Switch
PoE Switch
Clients
Clients
3 Simple Steps to Set Up PtP Connection
Without needing to enter the Web interface for configuration, the WBS-512AC has the DIP switch for setting to master (AP mode) and to slave (repeater
mode).UseronlyneedsthreesimplestepstoestablishthePtPconnectionwithoutany difculty.Byjustswitchingthebutton to“Master”onthemasterAP,and
pressing the reset button, the PtP connection can be established in 2 minutes as the connection steps are shown below.