Datasheet

ManualsBrandsPLANET Technology ManualsOutdoor Access Point/Bridge5GHz 802.11ac 900Mbps Outdoor Wireless CPE

WBS-512AC

5GHz 802.11ac 900Mbps Outdoor Wireless CPE

Flexible and Reliable Outdoor Wireless Solution with Superior Performance

PLANET WBS-512AC 802.11ac WAVE 2 900Mbps Outdoor Wireless CPE offers a

better range and excellent throughput than those of the traditional wireless device.

With the standard IEEE 802.3at Power over Ethernet (PoE) design, the WBS-

512AC can be easily installed in the areas where power outlets are not available.

The WBS-512AC is definitely suitable for wireless IP surveillance, and bridge link

of building to building and backbone of public service. Additionally, the self-healing

capability keeps connection alive all the time. With the IP55-rated outdoor enclosure,

the WBS-512AC can perform normally under rigorous weather conditions, meaning

it can be installed in any harsh, outdoor environments.

Industrial Compliant Wireless LAN and LAN

• Compliant with the IEEE 802.11a/n/ac WAVE2 MU-MIMO

wireless technology

• 2T2R architecture with data rate of up to 900Mbps

• Equipped with two 10/100/1000Mbps RJ45 ports with auto

MDI/MDI-X supported

Fixed Network Broadband Router

• Supported WAN connection types: DHCP, Static IP, PPPoE

• Supports Port Forwarding and DMZ for various networking

applications

• Supports DHCP server in Gateway/WISP mode

RF Interface Characteristics

• Built-in 14dBi dual-polarization antenna

• High output power with multiply-adjustable transmit power

control

Outdoor Environmental Characteristics

• IP55 rating

• IEEE 802.3 at Power over Ethernet design

• Operating temperature: -20~70 degrees C

Multiple Operation Modes and Wireless

Features

• Multiple operation modes: AP, Gateway, Repeater, Super

WDS, WISP

• WMM (Wi-Fi multimedia) provides higher priority to

multimedia transmitting over wireless

• Coverage threshold to limit the weak signal of clients

occupying session

• Real-time Wi-Fi channel analysis chart and client limit control

for better performance

• Support Terminal Fast Roaming with 802.11k, 802.11v, and

802.11r

Secure Network Connection

• Full encryption supported: WPA/WPA2, WPA-PSK/WPA2-PSK

and 802.1X RADIUS authentication

• Supports 802.1Q VLAN and SSID-to-VLAN mapping

Benets of MU-MIMO under 802.11ac Wave 2

With the MU-MIMO Wave 2 technology, the WBS-512AC, installed in public areas

such as hotspots, airports and conferences, reduces the frustration that Wi-Fi

users often experience in downloading web pages, e-mail file attachments and

media contents. For cellular operators, the WBS-512AC provides a better Wi-Fi

user experience, reducing the likelihood of users turning off Wi-Fi and putting more

load on the cellular network. For enterprises, this technology also can solve Wi-Fi

congestion issues in open work spaces and conference rooms.

Summary of content (6 pages)

PAGE 1
WBS-512AC 5GHz 802.11ac 900Mbps Outdoor Wireless CPE Industrial Compliant Wireless LAN and LAN • Compliant with the IEEE 802.
PAGE 2
WBS-512AC WAVE 1 • Supports IP/Port/MAC address/URL filtering, DoS, SPI WAVE 2 SU-MIMO Firewall MU-MIMO Serving one user at a time • Supports DMZ and Port Forwarding Serving multiple users simultaneously • Bandwidth control per IP address to increase network stabilit Easy Installation and Management • 3 simple steps to establish PtP ( AP + Repeater ) connection easily • Supports PLANET NMS Controllers in AP mode • Easy discovery by PLANET Smart Discovery • Self-healing mechanism through system au
PAGE 3
WBS-512AC 3 Steps to Set Up PtP Connection PtP Mode Slave Connecting Master PtPWDS Mode Slave S S M Connected PtPWDS Mode Slave Master S M Master (Master) WDS M (Master) Position “Master” to “Slave” on Slave AP (Slave) Press Reset/Pair and will be connected in 2 minutes Step 1 (Slave) Step 2 Step 3 Multiple SSIDs with VLAN Tagging The WBS-512AC supports WPA/WPA2, and the 802.1X RADIUS authentication to secure the wireless connection. Besides, the supported IEEE 802.
PAGE 4
WBS-512AC Setup Wizard Multiple Modes Home Dashboard for Wi-Fi Status View Wi-Fi Channel Analyzer Applications Long-distance Connection PLANET WBS-512AC is specially designed for long-distance outdoor surveillance and wireless backhaul solutions that are capable of providing farther connection through the built-in 14dBi dual-polarity antenna. It supports MU-MIMO WAVE 2.0 that can offer the more powerful transmission speed for data rate.
PAGE 5
WBS-512AC Specifications Product WBS-512AC Hardware IEEE 802.11a/n/ac IEEE 802.11i Standard Support IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x flow control IEEE 802.11k, 802.11v, and 802.11r Dimensions (W x D x H) 87 x 38 x 260 mm Weight 405g Power Requirements Power Consumption (max.) 48V DC IN,0.5A, IEEE 802.3 at PoE+ or 12V DC IN, 1.0A from DC Jack < 10W Wireless IEEE 802.11a/n/ac, 2T2R PoE: 1 x 10/100/1000BASE-TX, auto-MDI/MDIX, 802.
PAGE 6
WBS-512AC • Static IP WAN Type (GW/WISP mode) • Dynamic IP • PPPoE • Access Point • Gateway Wireless Modes • Repeater • Super WDS • WISP Channel Width 20MHz, 40MHz, 80MHz Encryption Type 64-/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X Enable/Disable SSID Broadcast Wireless Security Wireless Max. 32 MAC address filtering User Isolation Max. SSIDs 4 Max. Wireless Clients 64 per radio (50 is suggested, depending on usage) Max.