7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Copyright Copyright 2018 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Table of Contents Chapter 1. Product Introduction................................................................................. 4 1.1 Package Contents ...........................................................................................................................................4 1.2 Overview .............................................................................................................................................
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Chapter 1. Product Introduction 1.1 Package Contents The package should contain the following: Control Pad x 1 Quick Installation Guide x 1 Panel for surface-mounting x 1 DI/DO cable x 1 If any of the above items are missing, please contact your seller immediately. 1.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Safeguarding Homes Conveniently via the Multi-functional Sensor The VTS-700P provides 6 local zones of conventional detectors and 2 local monitored alarm outputs. When detectors are triggered upon detection, the alarm signal is picked up and you will be alerted of the situation via the VTS-700P or alarm outputs. The real-time alert can certainly stop the situation from becoming worse, thereby protecting your home from the would-be burglary.
-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Home Automation Management with Personal Scene Mode You can easily install the HAC-1000 Z-Wave Home Automation Control Gateway for home automation system control on your Indoor Touch Screen. In the "Scene" mode, you can set everything you want in every room of your home for any activity or anything in-between from morning to night. Four kinds of scenes can be created and customized to your personal preferences.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P 1.3 Specifications Product VTS-700P Hardware Platform Screen Size 7 inches Brightness 450 cd/m2 Video Resolution 800 x 480 Aspect Ratio 16:9 Touch Panel Projected capacitive (multi touch) Audio Standard SIP 2.0 (RFC3261), RTSP, TC/IP Voice / Video Codec G.711a/u, H.264 Audio Streaming Two-way audio Microphone Built-in microphone Audio Output Acoustic Echo Cancellation Network and Configuration Network Standard IEEE 802.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Chapter 2. Hardware Interface 2.1 Physical Descriptions Dimensions Dimensions (W x D x H) 245 x 155 x 26.5 mm Weight 581g (gross weight) Front Panel Weather and time information Four types of anti-theft monitoring screen (Yellow: Check the DI status) (Black: Do not check the DI state) Dial button Scene control (Z-Wave Gateway is required.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Rear Panel Security contact configuration diagram Name Color DI_1 Blue DI_2 Purple DI_3 Function description Pin The first security zone 7 The second security zone 8 Gray The third security zone 5 DI_4 White The fourth Security Zone 6 DI_5 Red White Emergency button 3 DI_6 Orange White Fire (smoke detection) 4 DI_COM Green White DI (External +12V power input) 1 DO_1 + Red 11 DO_1 - Yellow Security mode i
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Digital Input security contact Digital Output Alarm output contact 10
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Chapter 3. Wall Mounting and Cabling PLANET VTS-700P is easy to install by following the steps below: Step 1: Wiring and mounting on the wall -- Place the wall-mount panel in the position where you want and fix it with four screws, and then hang the VTS-700P main body as shown below. Step 2: Please connect the Ethernet cable directly to the LAN port on the back of the VTS-700P for PoE models.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Chapter 4. Configuration 4.1 How to use the VTS-700P When the PoE Ethernet cable is connected, you will see a penguin in the upper left corner of the VTS-700P screen, and you also can see the MAC address, default IP location (192.168.0.20), and the version number. On the left side of the VTS-700P home page, the temperature, weather, date and time are displayed.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P 4.2 To get IP address of VTS-700P Step 1: When you touch the time display zone of the VTS-700P homepage with your finger, the QR code will jump automatically on the screen Your smartphone should be set up in the same network segment as that of the VTS-700P.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P 4.2 Webpage Setting The main page as shown below displays 4 functions -- Status, Security Intercom and System.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P 4.3 Status The page shows the details of the VTS-700P.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P 4.4 Security Setting Security > security setting You can set up timer for start time, trigger time and alarm time ranging from 1 to 999 seconds.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Security>Door Unlock If customer has the HAC-1000 Z-Wave Gateway that controls Z-Wave door lock and other functions, user can set up door unlock event, home mode, sleep mode and away mode via API. For example: Door Unlock Event Input 'curl --anyauth "http://admin:admin@192.168.0.253:5000/DP/doorunlock.ncgi?id=fromVTS700P" &'. If you have changed the password, make sure the new password is correctly typed.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Home Mode Input 'curl --anyauth "http://admin:admin@192.168.0.253:5000/scenepost.html?fun=execute&id=1" &'. If you have changed the password, make sure the new password is correctly typed. Sleep Mode Input 'curl --anyauth "http://admin:admin@192.168.0.253:5000/scenepost.html?fun=execute&id=2" &' . If you have changed the password, make sure the new password is correctly typed. Away Mode Input 'curl --anyauth "http://admin:admin@192.168.0.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Security>DI Setting The VTS-700P provides DI1 to DI6 for NC (normal close) and NO (normal open) setting. Click Save when finished. Security>DI Check Setting In Security mode, DI1 to DI4 can be set to check and trigger alarm. DI5 and DI6 are for emergency event; system will send notification when alarm is triggered. Click Save when finished.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P 4.5 Intercom Intercom>SIP Basic Setting Door Phone 1. P2P mode: type in Door Phone IP address (for example, HDP-1100PT) 2. SIP register mode: type in Door Phone subscriber number (SIP ID@IP PBX IP address). Janitor 1. P2P mode: type in Video Phone IP address (for example, ICF-1800) 2. SIP register mode: type in Video Phone subscriber number (SIP ID@IP PBX IP address). Click Save when finished.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Intercom>SIP Server Setting Username: subscriber number Password: type in password Server: IP address of SIP server (For example, IPX-2100) Click Save when finished.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Intercom>Camera Setting User can add up to 4 IP cameras by typing camera IP address (For example, ICA-3250/4250 or HDP-1100PT). Camera Timeout: Set up the time to watch camera. Click Save when finished.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P Intercom>Volume Control Adjust the volume of the VTS-700P. Click Save when finished. 4.6 System System>Network Boot Protocol: 1. DHCP 2. Static: need to type in detailed IP address Click Save when finished. Reboot.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P 24
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P System>Date & Time You may set the Time Zone and may manually configure the system time. System>Maintenance When user gets the latest firmware from Planet website, user can upload the file to update. Click Upload when finished. Keep the power always on during processing. DO NOT turn off the power.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P System>Reset to Default Setting Reset the VTS-700P by default from the web UI. With that, the network profiles will not be kept, so you will need to access the VTS-700P via the default IP.
7-inch SIP Indoor Touch Screen PoE Video Intercom VTS-700P System>LCD Setting For inactivity, user can set up either slideshow or screen off timer. Click Save when finished. System>UI Setting User can type the names for 4 DI and 4 scenes shown below. These names will be shown on the main page. Click Save when finished.
