User's Manual

Enterprise 5-Port 10/100/1000T VPN Security Router
VR-300 series
- 124 -
response. The PoE Switch Series offers the following 3 actions:
 PD Reboot: It means system will reset the PoE port that is
connected to the PD.
 PD Reboot & Alarm: It means system will reset the PoE port
and issue an alarm message via Syslog.
 Alarm: It means system will issue an alarm message via
Syslog.
• Reboot Time
(30~180s)
This column allows user to set the PoE device rebooting time as
there are so many kinds of PoE devices on the market and they have
a different rebooting time.
The PD Alive-check is not a defining standard, so the PoE device on
the market doesn’t report reboot done information to the PoE Switch.
Thus, user has to make sure how long the PD will take to finish
booting, and then set the time value to this column.
System is going to check the PD again according to the reboot time.
If you are not sure of the precise booting time, we suggest you set it
longer.