User's Manual

5-Port 10/100/1000T VPN Security Router
VR-100
- 15 -
Chapter 2. Hardware Introduction
2.1 Physical Descriptions
2.1.1 Front View
LED
PWR
Green
Lights up when the power is on.
Internet
Lights up when the router connects to internet successfully.
Port 1-5
“Steady on” indicates the port is connected to other network device.
“Blink” to indicate there is traffic on the port.
Ports
USB Port
USB 3.0 port for system configuration backup and restoration.
Reset
Button
Power on the device and press the reset button for ten seconds to restore it to
factory default settings.
Port 1-3
It is a LAN port for connecting to a switch.
Port 4
Default is LAN port. It can be defined as LAN port or WAN port.
Port 5
It is a WAN port for connecting to a perimeter router.
2.1.2 Rear View
Interface
AC Power
Receptacle
For compatibility with electrical outlet standard in most areas of the world,
the device’s power supply automatically adjusts to line power in the range of
100-240V AC and 50/60Hz.
Plug the female end of the power cord firmly into the receptacle on the rear