Internet Telephony Gateway User's Manual

SIP Voice Gateway User’s Manual
Command Line Interface
57
ITG>atpm slist
System Info: Total dial time = 30000ms, First digit wait = 10000ms,
Interdigit wait = 5000ms, Dial term digit = None
OK
ITG>
atpm sys
dial_time 1st_digit_wait inter_digit_wait
[
dial_term_digit
]
Use the atpm sys command to set the time constraints for collection of dial digits.
Syntax description
dial_time
The maximum time, in millisecond, allowed for entry of the entire
string of dial digits. At expiration, ATPM starts address lookup.
1st_digit_wait
The maximum time, in millisecond, allowed between off-hook
and when the first dial digit is entered. At expiration, ATPM con-
siders address lookup to fail.
inter_digit_wait
The maximum time allowed between entry of each digit after the
previous digit. At expiration, ATPM starts address lookup.
dial_term_digitr
(Optional) End of the dial string is declared when the digit is en-
tered.
6.12 Tel Commands
tel show pcm_gain_level
The tel show pcm_gain_level command to display the gain level setting of the PCM codec’s re-
ceive channel.
Syntax Description
This command has no arguments or keywords
tel show port [
port#
]
The tel show port command displays the hook state of a telephony port.
Syntax Description
port#
Number of the port.
Default
If the port number is not specified, the CLI displays hook state of all telephony ports.
tel show ring_freq
The
tel show ring_freq
command to displays the frequency of the ring signal that VIP sends to
FXS ports..