Internet Telephony Gateway User's Manual

VIP User’s Manual
Command Line Interface
52
Size of the Voice Information Field (VIF), in bits, for a voice coder are related to the coding type and
the rate the voice coder samples a voice frame (the packet time), as shown in the table above. VIF
sizes of a coder of values other than those shown in the table are not valid.
6.11 Dial Plan Management Commands
Among the command sets supported by the CLI, the dial plan management commands are the
most sophisticated. Some of the dial plan management commands are only allowed when VIP is in
the atpm table update state. For ease of explaining, this command set is further categorized into
several sub command sets.
Sub command set Purposes Commands
atpm table up-
date state re-
quired?
Database update
control
Ÿ
Instruct VIP to start or stop
atpm table update state.
Ÿ
Store/restore atpm tables
to/from non-volatile storage
Ÿ
Purge atpm tables
Ÿ
Erase dial plan database
from non-volatile storage
atpm req
atpm done
atpm re-
store
atpm store
atpm purge
atpm erase
No
No
Yes
No
Yes
No
Destination table
management
Manage atpm destination table atpm dadd
atpm ddel
atpm dfind
atpm dlist
Yes
Yes
No
No
Hunt group table
management
Manage atpm hunt group table atpm hadd
atom hdel
atpm hfind
atpm hlist
Yes
Yes
No
No
Address table
management
Manage atpm address table atpm aadd
atpm adel
atpm afind
atpm alist
Yes
Yes
No
No
System Manage atpm system configura-
tion
atpm slist
atpm sys
No
Yes
The following sections describe each sub command set and the commands.