User's Manual
Table Of Contents
- 1 Overview
- 2 Appendix Table
- 3 Introduction to the User
- 4 Basic Function
- 5 Advance Function
- 6 Phone Settings
- 7 Web Configurations
- 8 Network >> Basic
- 8.1 Network >> Service Port
- 8.2 Network >> VPN
- 8.3 Network >> Advanced
- 8.4 Line >> SIP
- 8.5 Line >> SIP Hotspot
- 8.6 Line >> Dial Plan
- 8.7 Line >> Basic Settings
- 8.8 Phone settings >> Features
- 8.9 Phone settings >> Media Settings
- 8.10 Phone settings >> MCAST
- 8.11 Phone settings >> Action
- 8.12 Phone settings >> Time/Date
- 8.13 Phone settings >> Tone
- 8.14 Phone settings >> Advanced
- 8.15 Phonebook >> Contact
- 8.16 Phonebook >> Cloud phonebook
- 8.17 Phonebook >> Call List
- 8.18 Phonebook >> Web Dial
- 8.19 Phonebook >> Advanced
- 8.20 Call Log
- 8.21 Function Key >> Function Key
- 8.22 Function Key >> Softkey
- 8.23 Function Key >> Advanced
- 8.24 Application >> Manage Recording
- 8.25 Security >> Web Filter
- 8.26 Security >> Trust Certificates
- 8.27 Security >> Device Certificates
- 8.28 Security >> Firewall
- 8.29 Device Log >> Device Log
- 9 Trouble Shooting
70 / 122
Phone end: When the phone is in the default standby state, press the [Menu] >> [Basic] >> [Time &
Date] , use the up/down navigation button to edit parameters, press the [OK] to save after completion, as
shown in the figure:
Picture 86 - Set time & date on phone
Web end: Log in to the phone webpage and enter [Phone Settings] >> [Time/Date] , as shown in the
figure:
Picture 87 - Set time & date on webpage
Table 14 - Time Settings Parameters
Parameters Description
Mode
Auto/Manual
Auto: Enable network time synchronization via SNTP protocol, default
enabled.
Manual: User can modify data manually.
SNTP Server
SNTP server address
Time zone Select the time zone
Time format
Select time format from one of the followings:
1 JAN, MON
1 January, Monday
JAN 1, MON