User's Manual
Table Of Contents
- 1 Overview
- 2 Appendix Table
- 3 Introduction to the User
- 4 Basic Function
- 5 Advance Function
- 6 Phone Settings
- 7 Web Configurations
- 8 Network >> Basic
- 8.1 Network >> Service Port
- 8.2 Network >> VPN
- 8.3 Network >> Advanced
- 8.4 Line >> SIP
- 8.5 Line >> SIP Hotspot
- 8.6 Line >> Dial Plan
- 8.7 Line >> Basic Settings
- 8.8 Phone settings >> Features
- 8.9 Phone settings >> Media Settings
- 8.10 Phone settings >> MCAST
- 8.11 Phone settings >> Action
- 8.12 Phone settings >> Time/Date
- 8.13 Phone settings >> Tone
- 8.14 Phone settings >> Advanced
- 8.15 Phonebook >> Contact
- 8.16 Phonebook >> Cloud phonebook
- 8.17 Phonebook >> Call List
- 8.18 Phonebook >> Web Dial
- 8.19 Phonebook >> Advanced
- 8.20 Call Log
- 8.21 Function Key >> Function Key
- 8.22 Function Key >> Softkey
- 8.23 Function Key >> Advanced
- 8.24 Application >> Manage Recording
- 8.25 Security >> Web Filter
- 8.26 Security >> Trust Certificates
- 8.27 Security >> Device Certificates
- 8.28 Security >> Firewall
- 8.29 Device Log >> Device Log
- 9 Trouble Shooting
57 / 122
5.2 BLF List
BLF List Key is to put the number to be subscribed into a group on the server side, and the phone uses the
URL of this group to make unified subscription. The specific information, number, name and status of each
number can be resolved based on notify sent from the server. The unoccupied Memory Key is then set as the
BLF List Key. If the state of the subscription object changes later, the corresponding led light state will be
changed.
Configure BLF List function: log in the phone page, enter the [Line] >> [SIP] >> [Advanced settings] page,
open the BLF List, and configure the BLF List number.
Picture 64 - Configure the BLF List functionality
Use the BLF List function: when the configuration is completed, the phone will automatically subscribe to the
contents of the BLF List group. Users can monitor, call and transfer the corresponding number by pressing
the BLF List key.
Picture 65 - BLF List number display
5.3 Record
The device supports recording during a call.
5.3.1 Server Record
When using the network server to record, it is necessary to open the recording in the phone web page
[Application] >> [Manage recording]. The type is selected as network, and the address and port of the
recording server are filled in and the voice coding is selected. The web is as follows: