User's Manual
Table Of Contents
- 1 Overview
- 2 Appendix Table
- 3 Introduction to the User
- 4 Basic Function
- 5 Advance Function
- 6 Phone Settings
- 7 Web Configurations
- 8 Network >> Basic
- 8.1 Network >> Service Port
- 8.2 Network >> VPN
- 8.3 Network >> Advanced
- 8.4 Line >> SIP
- 8.5 Line >> SIP Hotspot
- 8.6 Line >> Dial Plan
- 8.7 Line >> Basic Settings
- 8.8 Phone settings >> Features
- 8.9 Phone settings >> Media Settings
- 8.10 Phone settings >> MCAST
- 8.11 Phone settings >> Action
- 8.12 Phone settings >> Time/Date
- 8.13 Phone settings >> Tone
- 8.14 Phone settings >> Advanced
- 8.15 Phonebook >> Contact
- 8.16 Phonebook >> Cloud phonebook
- 8.17 Phonebook >> Call List
- 8.18 Phonebook >> Web Dial
- 8.19 Phonebook >> Advanced
- 8.20 Call Log
- 8.21 Function Key >> Function Key
- 8.22 Function Key >> Softkey
- 8.23 Function Key >> Advanced
- 8.24 Application >> Manage Recording
- 8.25 Security >> Web Filter
- 8.26 Security >> Trust Certificates
- 8.27 Security >> Device Certificates
- 8.28 Security >> Firewall
- 8.29 Device Log >> Device Log
- 9 Trouble Shooting
53 / 122
Then set the hotline for each SIP line, which is off by default.
Open the hotline, set the hotline number, set the delay time of the hotline.
Picture 58 - Phone hotline setting interface
On the website [Line] >> [SIP] >> [Basic Settings], can also set up a hotline.
The setup hotline also corresponds to the SIP line. That is, the hotline set in the SIP1 webpage can
only be activated in the SIP1 line.
Picture 59 - Hotline set up on webpage
4.18 Emergency Call
The emergency call function is used to et the corresponding emergency call number on the phone after
enabling the keypad lock. You can also call emergency services when your phone is locked.
1) Configure the emergency call number: log in the phone page, enter the [Phone Settings] >> [Function
Settings]>> [Basic Settings]page, set up the emergency call code, if you need to set up more than one
emergency call code, please use ", "to separate.